Bear Silent BMW Puller

It is a professional tool for commercial or DIY use.

The kit is ideal assistance for you to remove and install ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series.

This silent bearings tool set is designed for long life in daily workshop use and categorized into industrial grade.

All tools are sorted in a blow molded case for easy storage and transportation.

• Silent bearing tool set for BMW, 16 pcs
• Allows the renewing of rubber bushings the suspension
• Includes various print pieces, stem and pods
• Suitable for vehicles from BMW, 1 Series models, for example, E81, E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series models E60, E61, E63; 6 Series models , E64, E38; 7 Series models, E65, E66, E67; 8 Series models E31, E85 Z4 models, E86, and Mini Cooper S R53 model
• A 8.9" feed rod for actuating the Silent bearing inserts with thread M12 x 0.06" long, at the end of the spindle with thread M12 x 0.06" short, with hex drive wrench size 0.31"
• Motion thread on the spindle and Axialrillenlager on the pressure piece cause high train and pressure performance with minimum effort (torque)
• A spindle nut with thread M12 x 0.06", with hexagonal drive wrench size 0.75"
• A compression nut with Axialrillenlage, internal thread M12 x 0.06", with hexagonal drive wrench size 0.94"
• Training and retraction pressure plots for extracting and inserting the ball joint on wheel carrier rear
• A support sleeve outer diameter 2.76", inner diameter 2.26", side slits
• A support plate, with hole diameter 12.5 mm, outer diameter 2.76", trimmed with outer diameter 2.24", height 1.48"
• A pull-out pressure sleeve, with internal thread M12 x 0.06", outer diameter 2", inner diameter 1.96", height 1.4"
• An intake pressure sleeve, with internal thread M12 x 0.06", outer diameter 2.28", inner diameter 1.85", height 1.7"
• Training and retraction apparatus for extracting and inserting the ball joint and the rubber mount in the trailing arm
• A pull-out spacer sleeve with a bore diameter of 0.49", outer diameter 2.17", inner diameter 1.81", height 2.85"
• A pull sleeve , with hole diameter 0.49", outer diameter 1.77", inner diameter 1.42", height 1.19"
• An intake spacer sleeve, with internal thread M12 x 0.06", outer diameter 2.17", inner diameter 1.83", height 1.19", with lateral phase
• Training and retraction pressure plots for extracting and inserting the rubber mount in the rear axle down, rear gear screw
• A spacer sleeve , with hole diameter 0.49", outer diameter 2.28", inner diameter 1.85", height 2.38"
• A pressure element, with internal thread M12 x 0.06", outer diameter 1.96", inner diameter 1.26", height 1"
• Training and retraction pressure plots for extracting and inserting the rubber mounts in the rear transmission mount, front and rear
• A sleeve with a bore diameter of 12.5 mm, outer diameter 65.0 mm, inner diameter 1.98", height 2.76"
• A pull-out pressure piece, with internal thread M12 x 0.06", outer diameter 1.89", inner diameter 1.26", height 0.79"
• An intake pressure piece , with internal thread M12 x 0.06", outer diameter 2.56", inner diameter 1.26", height 0.8"
• A draw- plate , with hole diameter 0.49", outer diameter 1.98", trimmed with outer diameter 1.81", height 0.48"
• Supplied in blow molded case
• Tool in the highest-quality execution
• Long life in daily workshop use

California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov