LED Light Strip 16 Color
-Alleviate Eye Strain: It raises the brightness level of the room, and you don’t have to turn on lamps or lights, which gives your eyes a break and causes no eye fatigue.
-Remote Control: Operated by remote control to change the LED lights of the TV background.
-16 LED Colors & 4 Modes: Multiple lighting colors to choose from. You can simply set it red, green, blue, white (see 16 colors in the following table, listed as “Static xx”) or make it flash, strobe, fade and smooth. Just enjoy the visual feast.
-USB Powered: Attach the TV lighting bar to any device that has a USB interface. Computer, power bank, USB socket or USB connector, either of them fit great.
-Customized Design: It can be cut with scissors on the cutting line to fit the desired size of your TV. Flexible led strip lights to shine as you paste them on the TV background, exhibition, bike, toy cars, UAV, stage, advertising column, outdoor activities, DIY clothing, night market lighting, camping lamp belt or computer case lamp bar.
-Safe & Durable: The RGB tape’s bulb and circuit are completely coated in flexible plastic and not easy to wear.
-Light Types: 16 Changing LED
-Modes: Flash, Strobe, Fade, Smooth
-Circuit Board Material: Copper
-Number of LED Lights: 30 / M
-Remote Control: Yes
-Light Adjustable: Yes
-Interface Type: USB
-Ingress Protection Level: IP65
-Power: 7.2 W
-USB Input / Output Voltage: DC 5V
-Working Time: 50,000 Hours
-Product Length: 39.4 IN / 1 M
-USB Cable Length: 37.9 IN / 96 CM
-Product Diameter: 0.39 IN / 1 CM
Current Rating: 1A
Features: Changes Colors, Dimmable, RGB, Waterproof, With Remote Control Non-Domestic Product: No
LED Chip Code: 5050
Light Source: LED
Model: 5050 SMD
Output Voltage: 5V
Power Source: Battery, Corded, USB
Room: Living Room
1 x TV Backlight Kit (1 M)
1 x Remote Control
1 x USB Power Supply Cable
1 x Operation Instructions of Controller
※. Brightness + means enhancing the brightness for “Static xx” Buttons while speeding up the changing colors for 4 modes: Flash, Strobe, Fade, and Smooth;
※. Brightness –, see as above, vice versa;
※. 3 base colors: Red (R), Green (G), Blue (B).
1. Cut the side with USB to the length you need. The other side will be useless;
2. The arrow on the LED CONTROLLER should face the arrow on the interface of the light strip;
3. Please pull out the insulation sheet on the bottom of the remote control;
4. The remote control should be pointed to the LED CONTROLLER to function;
5. Do not peel off the adhesive sticker with the yellow tape together;
6. Please allow deviation (1-3 mm) due to manual measurement
This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov